Flight Log Data: Scratch-Built ALTDuino-Rocks! (#ALTD04)
Featured Rocket
# Date of Launch Launch Location Payload Description Recovery System 1st Stage 2nd Stage 3rd Stage Lift-off Weight [g] Weather Conditions Temperature [°C] Altimeter Type Altitude [meters] Remarks
1 2013-09-24 Oberreichenbach, Germany 15" Parachute Klima C6-P 82.2 Sunny / Calm 20 ALTDuino 326.98 Perfect maiden flight. FW 2.19b.
2 2013-10-13 Waltersberg, Germany 15" Parachute Klima C6-P 82 Sunny / Windy 13 ALTDuino 319.0 Perfect flight. FW 2.19b.
3 2013-11-12 Oberreichenbach, Germany 15" Parachute Klima C6-P 82.5 Calm 5.5 ALTDuino 331.08 Perfect flight. FW 2.21b.
4 2013-11-27 Oberreichenbach, Germany GPS 15" Parachute Klima C6-P 92.7 Calm 0 ALTDuino 261.70 Perfect flight. GPS had interference from the Bluetooth module mounted on the receiver. FW 2.21b.
5 2013-12-01 Oberreichenbach, Germany GPS 15" Parachute Klima C6-P 94.6 Calm 3.5 ALTDuino 265.03 Perfect flight. Added a streamer to make it more visible in the sky. GPS worked fine. FW 2.21b.
6 2014-03-07 Oberreichenbach, Germany 15" Parachute Klima C6-P 82.1 Sunny / Calm 7 ALTDuino 335.80 Perfect flight. FW 2.24b.
7 2014-03-08 Oberreichenbach, Germany 15" Parachute Klima C6-P 82.1 Sunny / Slight breeze 6 ALTDuino 315.89 Perfect flight. FW 2.24b.
8 2014-03-09 Oberreichenbach, Germany 15" Parachute Klima C6-P 82.3 Sunny / Windy 7 ALTDuino 315.63 Perfect flight. FW 2.24b.
9 2014-08-17 Oberreichenbach, Germany 12" Parachute Klima C6-P 80.8 Cloudy / Windy 14 ALTDuino 323.14 Perfect flight. However it landed in a tree 17 meter above ground. With great luck I was able to recover it without any damage! FW 2.27b
10 2014-09-20 Rote Jahne, Germany 12" Parachute Klima C6-P 80.4 Partly cloudy / Slight winds 23 ALTDuino 320.44 Perfect flight. FW 2.28b.
11 2016-03-26 Oberreichenbach, Germany 12" Parachute Klima C6-P 80 Fog / Calm 6.5 ALTDuino 319.07 Perfect flight. Firmware 2.29b using Kalman filter.
12 2017-05-27 Oberreichenbach, Germany ACC-Logger 12" Parachute Klima B4-P 92 Sunny / Calm 12 ALTDuino 104.23 Perfect flight. Firmware 2.32b using Kalman filter.
13 2017-08-05 Manching, Germany ACC-Logger 12" Parachute Klima C6-P 91 Sunny / Windy 27 ALTDuino 284.38 Perfect flight. 3D printed nose cone. Firmware 2.32b.
14 2017-08-05 Manching, Germany ACC-Logger 12" Parachute Klima C6-P 91 Sunny / Windy 27 ALTDuino 282.03 Perfect flight. 3D printed nose cone. Firmware 2.32b.
15 2017-10-22 Oberreichenbach, Germany 12" Parachute Klima B4-P 78 Sunny / Calm 9 ALTDuino 137.78 Good flight. Main chute got tangled in the lower rocket section. Testing new Firmware 2.33b.
16 2017-10-25 Oberreichenbach, Germany 12" Parachute Klima B4-P 78 Sunny / Slight breeze 13 ALTDuino 116.56 Perfect flight. FW 2.33b.
17 2017-11-01 Oberreichenbach, Germany 12" Parachute Klima B4-P 80.7 Cloudy / Calm 5.5 ALTDuino 126.63 Perfect flight. Tested delay after apogee (1 sec). FW 2.33b.
18 2018-06-03 Oberreichenbach, Germany ACC1_2-Logger 12" Parachute Klima C6-P 94.6 Sunny / Calm 13 ALTDuino 278.39 Perfect flight. First use of a 3D printed e-bay. FW 2.33b.
19 2018-07-14 Oberreichenbach, Germany ACC1_2-Logger 12" Parachute Klima C6-P 94.6 Sunny / Calm 15 ALTDuino 284.73 Perfect flight. 3D printed e-bay. FW 2.33b.
20 2018-08-12 Oberreichenbach, Germany ACC1_2-Logger 12" Parachute Klima C6-P 94.6 Sunny / Calm 11 ALTDuino 285.67 Near perfect flight. Main failed to open due to too much wading. 3D printed e-bay. 2-stage FW UI load test successful. FW 2.34b.

Close this Web Page